Products

Cement Bond Tools

HSR-35 | 3-1/2” High Speed Radial Cement Bond Logging Tool

HSR-35 | 3-1/2” High Speed Radial Cement Bond Logging Tool

The High Speed Radial (HSR) presents the next generation of cement bond tools. It evaluates the cement bond quality and integrity to both casing and formation by providing a 360° cement map with a dedicated 8-segment Radial receiver located (2-ft) from the transmitter It also provides standard cement bond amplitude (CBL) through Near receiver (3-ft), and Variable Density Log (VDL) through Far receiver (5-ft). All sonic data is captured and stored digitally. A built-in advanced telemetry system ensures high speed logging without compromise in Sonic quality. A Gamma Ray, Casing Collar Locator and Temperature sensors are included in the tool.
SBT-20 | 2-3/4” Radial Analog Cement Bond Logging Tool

SBT-20 | 2-3/4” Radial Analog Cement Bond Logging Tool

The Segmented (Radial) Analog Tool (SBT) evaluates the cement bond quality and integrity to both pipe and formation by providing a 360° cement map with a dedicated 8-segment Radial receiver located (2-ft) from the transmitter It also provides standard cement bond amplitude (CBL) through Near receiver (3-ft), and Variable Density Log (VDL) through Far receiver (5-ft).
DBT-20 | 2-3/4” Dual Analog Cement Bond Logging Tool

DBT-20 | 2-3/4” Dual Analog Cement Bond Logging Tool

The Dual Analog Tool (DBT) evaluates the cement bond quality and integrity to both pipe and formation by providing the measurements of the cement bond amplitude (CBL) through near receiver (3-ft crystal ), and variable density log (VDL) through far receiver (5-ft crystal).
HSR-10 | 1-1/16” High Speed Radial Cement Bond Logging Tool

HSR-10 | 1-1/16” High Speed Radial Cement Bond Logging Tool

The High Speed Radial (HSR) presents the next generation of cement bond tools. It evaluates the cement bond quality and integrity to both casing and formation by providing a 360° cement map with a dedicated 8-segment Radial receiver located (2-ft) from the transmitter It also provides standard cement bond amplitude (CBL) through Near receiver (3-ft), and Variable Density Log (VDL) through Far receiver (5-ft). All sonic data is captured and stored digitally. A built-in advanced telemetry system ensures high speed logging without compromise in Sonic quality. A Gamma Ray, Casing Collar Locator and Temperature sensors are included in the tool.
HSR-20 | 2-3/4” High Speed Radial Cement Bond Logging Tool

HSR-20 | 2-3/4” High Speed Radial Cement Bond Logging Tool

The High Speed Radial (HSR) presents the next generation of cement bond tools. It evaluates the cement bond quality and integrity to both casing and formation by providing a 360° cement map with a dedicated 8-segment Radial receiver located (2-ft) from the transmitter It also provides standard cement bond amplitude (CBL) through Near receiver (3-ft), and Variable Density Log (VDL) through Far receiver (5-ft). All sonic data is captured and stored digitally. A built-in advanced telemetry system ensures high speed logging without compromise in Sonic quality. A Gamma Ray, Casing Collar Locator and Temperature sensors are included in the tool.

Pulse Tools

TTP-11 | 1-11/16″ Temperature Pulse Tool

TTP-11 | 1-11/16" Temperature Pulse Tool

The 1-11/16” Temperature Pulse Tool (TTP-11) measures borehole fluid temperature. The TTP-11 have a GO pin Feed-Through to allow negative-voltage powered tools to run in combination (for ex. Noise tools). Tool applications include: Finding cement top, locating fluid entry, identifying gas leaks, and injection zones. The TTP-11 tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
TCP-10 | 1-11/16″ Temperature CCL Tool

TCP-10 | 1-11/16" Temperature CCL Tool

The 1-11/16” Temperature/CCL Pulse (TCP-10) is a muti-sensor integrated tool to measure borehole Temperature and locate Casing Collars.  The platinum RTD (Resistance Temperature Detector) provides high resolution temperature readings with fast response. Tool applications include: Depth correlation - Finding cement top - Locating fluid entry - Identifying gas leaks and injection zones
GRT-10 | 1-11/16″ Gamma Ray Pulse Tool

GRT-10 | 1-11/16" Gamma Ray Pulse Tool

The DSS 1-11/16” Gamma Ray pulse Tool (GRT-10) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-10 outputs 25 µs pulses in response to gamma radiation within the well.
GRC-10 | 1-11/16″ Gamma Ray CCL Tool

GRC-10 | 1-11/16" Gamma Ray CCL Tool

The DSS GRC-10 Is a 1 11/16” multi purpose pulse Tool (GRC). This tool includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. It can be used as a depth correlation device between cased and open holes. It also includes a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage.
HTC-10 | 1-11/16” High Temperature

HTC-10 | 1-11/16” High Temperature

The DSS HTC-10 Is a specially designed pulse tool made to operate at temperatures up to 250 °C for extended periods of time. This tool does not use a flask. The tool has an operational life of up to 1000 hours at temperatures between 230°C and 250°C. It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. It also has a magnetic casing collar locator (CCL).
TTP-20 | 2-3/4” Temperature Pulse Tool

TTP-20 | 2-3/4” Temperature Pulse Tool

The DSS 2 3/4” Temperature Pulse Tool (TTP) measures the borehole fluid temperature, which can be used for finding cement top. It’s also can be used for finding fluid entry, gas leaks, and injection zones. The TTP tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
GTC-10 | 1-11/16” Gamma Ray Temperature CCL Tool

GTC-10 | 1-11/16” Gamma Ray Temperature CCL Tool

The DSS 1 11/16” Is a multi purpose pulse Tool (GTC). It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. This tool also includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The last device in this tool is a magnetic casing collar locator
GTC-11 | 1-11/16” Gamma Ray Temperature CCL Tool with Negative Feed Through

GTC-11 | 1-11/16” Gamma Ray Temperature CCL Tool with Negative Feed Through

The 1-11/16” Gamma Ray/Temperature/CCL tool (GTC-11) is a multi-sensor correlation and well monitoring tool. The GTC-11 includes a Platinum RTD sensor which provides high-resolution wellbore temperature data with fast response. The GTC-11 also has a GR detector (scintillation crystal and a rugged photomultiplier tube) to measure the formation natural GR activity. The tool has a magnetic sesnor to locate casing collars, CCL. The GTC-11 model has feed-through wiring to a standard GO connector on the bottom so when a negative voltage is applied at the cable head, the negative voltage is routed directly to bottom GO connector. This function allows a Noise tool, or any other negative-powered tool, to be used below the GTC-11.
GRT-20 | 2-3/4” Gamma Ray Pulse Tool

GRT-20 | 2-3/4” Gamma Ray Pulse Tool

The DSS 2 3/4” Gamma Ray pulse Tool (GRT) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-01 outputs 25 µs pulses in response to gamma radiation within the well.
CCL-20 | 2-3/4” Casing Collar Locator

CCL-20 | 2-3/4” Casing Collar Locator

This logging CCL tool is a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage. The voltage difference in the coil is amplified onto the wireline

Accessories

RAC-20 | 2-3/4” Five Arm End Roller Centralizer

RAC-20 | 2-3/4” Five Arm End Roller Centralizer

This 5 arm roller centralizer is designed to center logging tools accurately in vertical, deviated, or horizontal wells. This design is specifically adapted for work in horizontal wells. Two TM3 wheels on each arm pair allow the tool to roll easily in deviations up to 90 degrees. The centralizer has five sets of paired arms linked together to provide accurate centering.
RAC-21 | 2-3/4” Five Arm Mid Roller Centralizer

RAC-21 | 2-3/4” Five Arm Mid Roller Centralizer

This 5 arm roller centralizer is designed to center logging tools accurately in vertical, deviated, or horizontal wells. This design is specifically adapted for work in horizontal wells. Two TM3 wheels on each arm pair allow the tool to roll easily in deviations up to 90 degrees. The centralizer has five sets of paired arms linked together to provide accurate centering. The radial force is constant throughout the full range of movement.
RAC-30 | 3-1/2” Five Arm End Roller Centralizer

RAC-30 | 3-1/2” Five Arm End Roller Centralizer

This 5 arm roller centralizer is designed to center logging tools accurately in vertical, deviated, or horizontal wells. This design is specifically adapted for work in horizontal wells. Two TM3 wheels on each arm pair allow the tool to roll easily in deviations up to 90 degrees. The centralizer has five sets of paired arms linked together to provide accurate centering.
RAC-31 | 3-1/2” Five Arm Mid Roller Centralizer

RAC-31 | 3-1/2” Five Arm Mid Roller Centralizer

This 5 arm roller centralizer is designed to center logging tools accurately in vertical, deviated, or horizontal wells. This design is specifically adapted for work in horizontal wells. Two TM3 wheels on each arm pair allow the tool to roll easily in deviations up to 90 degrees. The centralizer has five sets of paired arms linked together to provide accurate centering. The radial force is constant throughout the full range of movement.
RAC-10 | 1-11/16” Five Arm End Roller Centralizer

RAC-10 | 1-11/16” Five Arm End Roller Centralizer

The DSS HTC-10 Is a specially designed pulse tool made to operate at temperatures up to 250 °C for extended periods of time. This tool does not use a flask. The tool has an operational life of up to 1000 hours at temperatures between 230°C and 250°C. It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. It also has a magnetic casing collar locator (CCL).
RAC-11 | 1-11/16” Five Arm Mid Roller Centralizer

RAC-11 | 1-11/16” Five Arm Mid Roller Centralizer

The DSS HTC-10 Is a specially designed pulse tool made to operate at temperatures up to 250 °C for extended periods of time. This tool does not use a flask. The tool has an operational life of up to 1000 hours at temperatures between 230°C and 250°C. It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. It also has a magnetic casing collar locator (CCL).