TTP-11 | 1-11/16″ Temperature Pulse Tool

The 1-11/16” Temperature Pulse Tool (TTP-11) measures borehole fluid temperature. The TTP-11 have a GO pin Feed-Through to allow negative-voltage powered tools to run in combination (for ex. Noise tools).

Tool applications include: Finding cement top, locating fluid entry, identifying gas leaks, and injection zones.

The TTP-11 tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.

Share on linkedin
Share on facebook

Applications

Borehole fluid temperature
Identification of cement top
Gas leak detection and injection zones
Location of fluid movement behind casing

Features

Rated for high-temperature and high-pressure environments
Bottom end feed through power (optional to run negative voltage)
Compatible with most surface systems
Tool calibrated to 20 counts/°C and can be calibrated to 10 counts/°F
Can be run alone or combined with most analog tools
Electronic design verified for 1 hour operation at 415°F to ensure reliability
Easy to service and maintain
Proudly designed and manufactured in Canada
 Tool Operating Voltage 90-150 VDC  Tool Length (make-up)  72.79 cm (28.66 in)
 Tool Operating Current 10-20 mA  Tool Length (shipping)  82 cm (32.29 in)
 Output Pulses Amplitude Positive  7.5 VDC  Tool Weight 5.57 Kg (12.3 Lb)
 Output Pulses Width 25 µS  Measurement Point from Top of Tool  61.36 cm (24.16 in)
 Max. Pressure by design 172.4 Mpa (25,000 PSI)  Borehole Fluids Oil – Fresh Water – Brine
 Max. Temperature 204°C (400°F)  Top End Connector Contact Socket Go Female
 Tool Diameter – OD 42.86 mm(1-11/16 in)  Bottom End Connector Contact Pin Go Male

I'd like to get a quote on TTP-11 | 1-11/16″ Temperature Pulse Tool

Products related to TTP-11 | 1-11/16″ Temperature Pulse Tool

TTP-11 | 1-11/16″ Temperature Pulse Tool

TTP-11 | 1-11/16" Temperature Pulse Tool

The 1-11/16” Temperature Pulse Tool (TTP-11) measures borehole fluid temperature. The TTP-11 have a GO pin Feed-Through to allow negative-voltage powered tools to run in combination (for ex. Noise tools). Tool applications include: Finding cement top, locating fluid entry, identifying gas leaks, and injection zones. The TTP-11 tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
TCP-10 | 1-11/16″ Temperature CCL Tool

TCP-10 | 1-11/16" Temperature CCL Tool

The 1-11/16” Temperature/CCL Pulse (TCP-10) is a muti-sensor integrated tool to measure borehole Temperature and locate Casing Collars.  The platinum RTD (Resistance Temperature Detector) provides high resolution temperature readings with fast response. Tool applications include: Depth correlation - Finding cement top - Locating fluid entry - Identifying gas leaks and injection zones
GRT-10 | 1-11/16″ Gamma Ray Pulse Tool

GRT-10 | 1-11/16" Gamma Ray Pulse Tool

The DSS 1-11/16” Gamma Ray pulse Tool (GRT-10) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-10 outputs 25 µs pulses in response to gamma radiation within the well.
GRC-10 | 1-11/16″ Gamma Ray CCL Tool

GRC-10 | 1-11/16" Gamma Ray CCL Tool

The DSS GRC-10 Is a 1 11/16” multi purpose pulse Tool (GRC). This tool includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. It can be used as a depth correlation device between cased and open holes. It also includes a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage.
TTP-20 | 2-3/4” Temperature Pulse Tool

TTP-20 | 2-3/4” Temperature Pulse Tool

The DSS 2 3/4” Temperature Pulse Tool (TTP) measures the borehole fluid temperature, which can be used for finding cement top. It’s also can be used for finding fluid entry, gas leaks, and injection zones. The TTP tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
GTC-10 | 1-11/16” Gamma Ray Temperature CCL Tool

GTC-10 | 1-11/16” Gamma Ray Temperature CCL Tool

The DSS 1 11/16” Is a multi purpose pulse Tool (GTC). It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. This tool also includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The last device in this tool is a magnetic casing collar locator