HTC-10 | 1-11/16” High Temperature

The DSS HTC-10 Is a specially designed pulse tool made to operate at temperatures up to 250 °C for extended periods of time. This tool does not use a flask. The tool has an operational life of up to 1000 hours at temperatures between 230°C and 250°C. It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. It also has a magnetic casing collar locator (CCL).

Share on linkedin
Share on facebook

Applications

Borehole fluid temperature
Depth correlation
Combine two services in one run

Features

Rated for high-temperature and high-pressure environments
Open basket design through which fluid can easily flow for accurate measurement
CCL outputs a line shake signal to the surface
Temperature tool outputs positive pulses calibrated to 10 counts/°C
Compatible with most surface systems
Uses electronic components especially designed for high-temperature
Electronic design verified for 1 hour operation at 255°C to ensure reliability
Sour service compatible materials
Not a flasked tool. Does not have a limit on time at temperature

Specifications

Tool Operating Voltage 25 to 40 VDC Tool Length (make-up) 92.7 cm (36.5 in)
Tool Operating Current 35 to 40 mA Tool Length (shipping) 94.5 cm (37.2 in)
Output Pulse Amplitude Neg. ~10 VDC Tool Weight 7 Kg (15.4 Lb)
Output Pulse Width 25 µS CCL Point from Top of Tool 22.86 cm (9.0 in)
Max. Pressure 172.4 Mpa (25000 PSI)
Max. Temperature 250°C (482°F) Borehole Fluids Oil – Fresh Water – Brine
Tool Diameter – OD 42.85 mm(1 11/16 in) Top End Connector Contact Socket Go Female

 

I'd like to get a quote on HTC-10 | 1-11/16” High Temperature

Products related to HTC-10 | 1-11/16” High Temperature

TTP-11 | 1-11/16″ Temperature Pulse Tool

TTP-11 | 1-11/16" Temperature Pulse Tool

The 1-11/16” Temperature Pulse Tool (TTP-11) measures borehole fluid temperature. The TTP-11 have a GO pin Feed-Through to allow negative-voltage powered tools to run in combination (for ex. Noise tools). Tool applications include: Finding cement top, locating fluid entry, identifying gas leaks, and injection zones. The TTP-11 tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
TCP-10 | 1-11/16″ Temperature CCL Tool

TCP-10 | 1-11/16" Temperature CCL Tool

The 1-11/16” Temperature/CCL Pulse (TCP-10) is a muti-sensor integrated tool to measure borehole Temperature and locate Casing Collars.  The platinum RTD (Resistance Temperature Detector) provides high resolution temperature readings with fast response. Tool applications include: Depth correlation - Finding cement top - Locating fluid entry - Identifying gas leaks and injection zones
GRT-10 | 1-11/16″ Gamma Ray Pulse Tool

GRT-10 | 1-11/16" Gamma Ray Pulse Tool

The DSS 1-11/16” Gamma Ray pulse Tool (GRT-10) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-10 outputs 25 µs pulses in response to gamma radiation within the well.
GRC-10 | 1-11/16″ Gamma Ray CCL Tool

GRC-10 | 1-11/16" Gamma Ray CCL Tool

The DSS GRC-10 Is a 1 11/16” multi purpose pulse Tool (GRC). This tool includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. It can be used as a depth correlation device between cased and open holes. It also includes a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage.
GRT-20 | 2-3/4” Gamma Ray Pulse Tool

GRT-20 | 2-3/4” Gamma Ray Pulse Tool

The DSS 2 3/4” Gamma Ray pulse Tool (GRT) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-01 outputs 25 µs pulses in response to gamma radiation within the well.
CCL-20 | 2-3/4” Casing Collar Locator

CCL-20 | 2-3/4” Casing Collar Locator

This logging CCL tool is a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage. The voltage difference in the coil is amplified onto the wireline