GTC-11 | 1-11/16” Gamma Ray Temperature CCL Tool with Negative Feed Through

The 1-11/16” Gamma Ray/Temperature/CCL tool (GTC-11) is a multi-sensor correlation and well monitoring tool. The GTC-11 includes a Platinum RTD sensor which provides high-resolution wellbore temperature data with fast response. The GTC-11 also has a GR detector (scintillation crystal and a rugged photomultiplier tube) to measure the formation natural GR activity. The tool has a magnetic sesnor to locate casing collars, CCL.

The GTC-11 model has feed-through wiring to a standard GO connector on the bottom so when a negative voltage is applied at the cable head, the negative voltage is routed directly to bottom GO connector. This function allows a Noise tool, or any other negative-powered tool, to be used below the GTC-11.

Share on linkedin
Share on facebook

Applications

Borehole fluid temperature
Depth correlation
Combine two services in one run
Noise logging when a noise tool is attached

Features

Rated for high-temperature and high-pressure environments
Inline temperature probe
CCL outputs a line shake signal to the surface
Temperature tool outputs positive pulses calibrated to 20 counts/°C
Gamma Ray tool outputs negative pulses of actual Gamma Ray detector
Gamma Ray has a maximum output of 5000 counts
Can be used with a negative powered noise tool attached to the bottom connector
When a negative voltage is applied at the cable head, the negative voltage is routed directly to the bottom of the tool
Compatible with most surface systems
Designed to make pulse conflicts impossible
Electronic design verified for 1 hour operation at 415°F to ensure reliability
H2S resistant materials

Specifications

Tool Operating Voltage 100-150 VDC Tool Length (make-up) 141.4 cm (55.66 in)
Tool Operating Current 50-60 mA Tool Length (shipping) 150 cm (59.34 in)
Output Pulses Amplitude Pos. & Neg. ~10 VDC Tool Weight 10.8 Kg (24.0 Lb)
Output Pulses Width 25 µS 0 to 5000 Count Gamma Ray Point from Top of Tool
Max. Pressure 172.4 Mpa (25 000 PSI) CCL Point from Top of Tool
Max. Temperature 204°C (400°F) Borehole Fluids Any
Tool Diameter – OD 42.85 mm(1 11/16 in) Top End Connector Contact Socket Go Female

 

I'd like to get a quote on GTC-11 | 1-11/16” Gamma Ray Temperature CCL Tool with Negative Feed Through

Products related to GTC-11 | 1-11/16” Gamma Ray Temperature CCL Tool with Negative Feed Through

TTP-11 | 1-11/16″ Temperature Pulse Tool

TTP-11 | 1-11/16" Temperature Pulse Tool

The 1-11/16” Temperature Pulse Tool (TTP-11) measures borehole fluid temperature. The TTP-11 have a GO pin Feed-Through to allow negative-voltage powered tools to run in combination (for ex. Noise tools). Tool applications include: Finding cement top, locating fluid entry, identifying gas leaks, and injection zones. The TTP-11 tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
TCP-10 | 1-11/16″ Temperature CCL Tool

TCP-10 | 1-11/16" Temperature CCL Tool

The 1-11/16” Temperature/CCL Pulse (TCP-10) is a muti-sensor integrated tool to measure borehole Temperature and locate Casing Collars.  The platinum RTD (Resistance Temperature Detector) provides high resolution temperature readings with fast response. Tool applications include: Depth correlation - Finding cement top - Locating fluid entry - Identifying gas leaks and injection zones
GRT-10 | 1-11/16″ Gamma Ray Pulse Tool

GRT-10 | 1-11/16" Gamma Ray Pulse Tool

The DSS 1-11/16” Gamma Ray pulse Tool (GRT-10) measures the gamma radiation level of the formation derived from natural isotopes. It can be used as a depth correlation device between cased and open holes. This tool is comprised of a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The GRT-10 outputs 25 µs pulses in response to gamma radiation within the well.
GRC-10 | 1-11/16″ Gamma Ray CCL Tool

GRC-10 | 1-11/16" Gamma Ray CCL Tool

The DSS GRC-10 Is a 1 11/16” multi purpose pulse Tool (GRC). This tool includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. It can be used as a depth correlation device between cased and open holes. It also includes a magnetic device that detects the changes in metal mass of a casing collar as it moves through well casing. The detector is a coil mounted between two opposing magnets. As the tool passes a collar; the magnet flux around the two magnets disturbed and induces a low frequency voltage.
TTP-20 | 2-3/4” Temperature Pulse Tool

TTP-20 | 2-3/4” Temperature Pulse Tool

The DSS 2 3/4” Temperature Pulse Tool (TTP) measures the borehole fluid temperature, which can be used for finding cement top. It’s also can be used for finding fluid entry, gas leaks, and injection zones. The TTP tool measures fluid temperature by measuring the resistance of a platinum RTD (Resistance Temperature Detector) inside a pressure probe. The measurements from the low mass probe results in high resolution data with fast temperature response.
GTC-10 | 1-11/16” Gamma Ray Temperature CCL Tool

GTC-10 | 1-11/16” Gamma Ray Temperature CCL Tool

The DSS 1 11/16” Is a multi purpose pulse Tool (GTC). It includes a platinum RTD (Resistance Temperature Detector) which provides high resolution data with fast temperature response. This tool also includes a Sodium Iodide scintillation crystal and photomultiplier tube which demonstrate high sensitivity and resolution. The last device in this tool is a magnetic casing collar locator